Ikerketa eta Transferentzia taldeak

Otegi MARTINEZ, Nagore

Dagokion taldea: Materialak eraldatzeko prozesu aurreratuak  

Izen abizenak: Nagore Otegi MARTINEZ
Herritartasuna:
Harremanetarako Telefonoa: 943794700
Kontaktatu



Formakuntza

Doktoregoa

  • 2012

Lizentziatua, Ingeniaria, Gradua, Arkitektoa

  • INGENIERIA INDUSTRIAL, Mondragon Unibertsitatea, 2007

Egungo lan egoera

  • Erakundea: Mondragon Unibertsitatea
  • Zentroa: Goi Eskola Politeknikoa
  • Departamentua: Mekanika eta Ekoizpen Industriala
  • Ikerketa taldea: Materialak eraldatzeko prozesu aurreratuak

Txostenak kongresuetan/Konferentziak

Lightweighting potential of an automotive roof reinforcement using aluminum alloys in place of high strength steels

AIP Conference Proceedings. Vol. 2113. Nº 1. Proceeedings of the 22nd International ESAFORM Conference on Material forming (ESAFORM 2019). Editor, Lander Galdos et al. Published 2 July,

Urtea: 2019

Egileak: Ibarretxe, U., Galdos, L., Otegi, N., Ortubay, R., Argarate, U., Aranburu, A.

Numerical prediction of force and energy consumption in roll forming processes

AIP Conference Proceedings. Vol. 2113. Nº 1. Proceeedings of the 22nd International ESAFORM Conference on Material forming (ESAFORM 2019). Editor, Lander Galdos et al. Published 2 July,

Urtea: 2019

Egileak: Eneko Saenz de Argandoña, Joseba Mendiguren, Lander Galdos, Nagore Otegi, Javier Trinidad, Alain Armendariz

On the accurate characterization of the drawbead up-lift forces

IOP Conference Series: Materials Science and Engineering. Vol. 418. Nº 1. Institute of Physics Publishing. 21 September,

Urtea: 2018

Egileak: I. Gil, L. Galdos, N. Otegi, J. Mendiguren, E. Saenz de Argandoña

Influence of roll levelling on material properties and postforming springback

Proceedings of 21st International ESAFORM Conference on Material Forming. Editors, L. Fratini, R. DiLorenzo, G. Buffa, G. Ingarao. AIP Conference Proceedings. Vol. 1960. Nº 1,

Urtea: 2018

Egileak: L. Galdos, J. Mendiguren, E. S. de Argandona, N. Otegi, E. Silvestre

Aurreko jarduera profesionala

AUTOTECH (GESTAMP)

Hasiera data: 2016/12/01 | Bukaera data: 2017/09/29

AUROCK

Hasiera data: 2015/01/01 | Bukaera data: 2016/10/31

IK4-IKERLAN

Hasiera data: 2012/12/03 | Bukaera data: 2014/12/21

Hizkuntzen ezagutza

  • Frantsesa (B2)
  • Ingelesa (C1)

Numerical study of advanced friction modelling for sheet metal forming: influence of the die local roughness

ARTICULO  |  Tribology International. Available online 7 September 2021, 107259

Urtea: 2021  |  ISBN/ISSN: 0301-679X

Egilea: ZABALA EGUREN, ALAITZ   SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO   CAÑIZARES, DANIEL   LLAVORI OSA, IÑIGO   OTEGI MARTINEZ, NAGORE   MENDIGUREN OLAETA, JOSEBA  

Monitoring of a Hammer Forging Testing Machine for High-Speed Material Characterization

ARTICULO  |  Procedia Manufacturing. Vol. 47. Pp. 321-328,

Urtea: 2020  |  ISBN/ISSN: 2351-9789

Egilea: AGIRRE BIKUÑA, JULEN   OTEGI MARTINEZ, NAGORE   ABEDUL MORENO, DAVID   ORUNA OTALORA, ANGEL   GALDOS ERRASTI, LANDER  

The influence of the kinematic hardening on the FEM simulation of Tension Levelling Process

ARTICULO  |  Procedia Manufacturing. Vol. 47. Pp. 1381-1386,

Urtea: 2020  |  ISBN/ISSN: 2351-9789

Egilea: GARCIA, AITOR   TRINIDAD NARANJO, JAVIER   OTEGI MARTINEZ, NAGORE   MENDIGUREN OLAETA, JOSEBA   SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO   SILVESTRE SORIANO, ELENA   GALDOS ERRASTI, LANDER  

Lightweighting potential of an automotive roof reinforcement using aluminum alloys in place of high strength steels

COMUNICACION_CONGRESO  |  AIP Conference Proceedings. Vol. 2113. Nº 1. Proceeedings of the 22nd International ESAFORM Conference on Material forming (ESAFORM 2019). Editor, Lander Galdos et al. Published 2 July,

Urtea: 2019  |  ISBN/ISSN: 9780735418479

Egilea: IBARRETXE LÓPEZ, UNAI   GALDOS ERRASTI, LANDER   OTEGI MARTINEZ, NAGORE   ORTUBAY IBABE, RAFAEL   ARGARATE, U.   ARANBURU, A.  

Numerical prediction of force and energy consumption in roll forming processes

COMUNICACION_CONGRESO  |  AIP Conference Proceedings. Vol. 2113. Nº 1. Proceeedings of the 22nd International ESAFORM Conference on Material forming (ESAFORM 2019). Editor, Lander Galdos et al. Published 2 July,

Urtea: 2019  |  ISBN/ISSN: 9780735418479

Egilea: SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO   MENDIGUREN OLAETA, JOSEBA   OTEGI MARTINEZ, NAGORE   TRINIDAD NARANJO, JAVIER   ARMENDARIZ, ALAIN  

Drawbead uplift force analytical model for deep drawing operations

ARTICULO  |  Journal of Physics: Conference Series. Vol. 1063. Nº 1. 6 August,

Urtea: 2018  |  ISBN/ISSN: 17426588

Egilea: GIL ACEDO, IMANOL   GALDOS ERRASTI, LANDER   MENDIGUREN OLAETA, JOSEBA   OTEGI MARTINEZ, NAGORE   SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO  

Influence of roll levelling on material properties and postforming springback

COMUNICACION_CONGRESO  |  Proceedings of 21st International ESAFORM Conference on Material Forming. Editors, L. Fratini, R. DiLorenzo, G. Buffa, G. Ingarao. AIP Conference Proceedings. Vol. 1960. Nº 1,

Urtea: 2018

Egilea: GALDOS ERRASTI, LANDER   SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO   OTEGI MARTINEZ, NAGORE   SILVESTRE SORIANO, ELENA  

On the accurate characterization of the drawbead up-lift forces

COMUNICACION_CONGRESO  |  IOP Conference Series: Materials Science and Engineering. Vol. 418. Nº 1. Institute of Physics Publishing. 21 September,

Urtea: 2018  |  ISBN/ISSN: 17578981

Egilea: GIL ACEDO, IMANOL   GALDOS ERRASTI, LANDER   OTEGI MARTINEZ, NAGORE   MENDIGUREN OLAETA, JOSEBA   SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO  

Preface. Foreword

ARTICULO  |  Materialwissenschaft und Werkstofftechnik. Vol. 43. Nº 9. Special Issue: Superplastic Forming. P. 757. 24 September,

Urtea: 2012  |  ISBN/ISSN: Online 15214052

Egilea: OTEGI MARTINEZ, NAGORE  

Analysis of the Capabilities of a Hyperbolic Constitutive Equation for Al-5083 Superplastic Aluminium Alloy

COMUNICACION_CONGRESO  |  AIP Conference Proceedings. Vol. 1353. Proceedings of the 14th International Conference on Material Forming (ESAFORM, 2011). Edited by G. Menary. Pp. 1574-1579.

Urtea: 2011  |  ISBN/ISSN: 9780735409118

Egilea: OTEGI MARTINEZ, NAGORE   GALDOS ERRASTI, LANDER   HURTADO HURTADO, JOSE IGNACIO   LEEN, S. B.  

Enhancement of Incremental Sheet Metal Forming Technology by Means of Stretch Forming

COMUNICACION_CONGRESO  |  International conference on advances in materials and processing technologies (AMPT 2010). Vol. 1315,

Urtea: 2010  |  ISBN/ISSN: 9780735408715

Egilea: GALDOS ERRASTI, LANDER   SUKIA IMAZ, AITOR   OTEGI MARTINEZ, NAGORE   ORTUBAY IBABE, RAFAEL   RUIZ DE LA TORRE ACHA, AITOR   FORGAS, A.   RASTELLINI, F.  

Optimization of geometrical accuracy of an industrial shape in single point incremental forming

COMUNICACION_CONGRESO  |  Proceedigns of 9th International Conference on technology of Plasticity (ICTP 2008). Gyeongju. 2008. Korean Society for Technology of Plasticity, Korea

Urtea: 2008  |  ISBN/ISSN: 9788957081518

Egilea: OTEGI MARTINEZ, NAGORE   GALDOS ERRASTI, LANDER   SUQUIA IMAZ, AITOR   MENTXAKA, A  

Desarrollo de modelos numéricos avanzados para la estampación de componentes metálicos multifásicos para el vehículo ligerado

COMPETITIVO

Hasiera Data:  2018-03-01  |  Amaiera Data:  2019-12-31

Finantzaketa: Gobierno Vasco

Parte-hartzea: FUNDACIÓN CIE I+D+I;FUNDACIÓN TECNALIA RESEARCH & INNOVATION;MONDRAGON GOI ESKOLA POLITEKNIKOA JOSE Mª ARIZMENDIARRIETA, S. COOP.

Egilea: Otegi MARTINEZ, Nagore (INVEST)   ORTUBAY IBABE, RAFAEL (INVEST)   Mendiguren Olaeta, Joseba (INVEST)   SUQUIA IMAZ, AITOR (INVEST)   GALDOS ERRASTI, LANDER (INVEST)   SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO (INVEST)  

Desarrollo de nueva Línea de Corte Transversal de gran anchura para Aluminios de alta resistencia para sector Aeronáutico y Automóvil

CONTRATO

Hasiera Data:  2018-02-15  |  Amaiera Data:  2018-12-31

Finantzaketa: Gobierno Vasco

Parte-hartzea: FAGOR ARRASATE, S.COOP.

Egilea: Otegi MARTINEZ, Nagore (INVEST)   ITURRASPE LARREATEGUI, MARIA AINHOA (INVEST)   ORTUBAY IBABE, RAFAEL (INVEST)   Mendiguren Olaeta, Joseba (INVEST)   SUQUIA IMAZ, AITOR (INVEST)   GALDOS ERRASTI, LANDER (INVEST_PRINCIPAL)   ORUNA OTALORA, ZIGOR ALBERTO (INVEST)   SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO (INVEST)  

Automobilgintzarako, berotan estanpatutako duroaluminiozko osagaiak ekoizteko instalakuntzaren definizioa

CONTRATO

Hasiera Data:  2018-02-15  |  Amaiera Data:  2018-12-31

Finantzaketa: Gobierno Vasco

Parte-hartzea: FAGOR ARRASATE, S.COOP.

Egilea: Otegi MARTINEZ, Nagore (INVEST)   Hurtado HURTADO, Iñaki (INVEST)   ORTUBAY IBABE, RAFAEL (INVEST)   Mendiguren Olaeta, Joseba (INVEST)   SUQUIA IMAZ, AITOR (INVEST)   GALDOS ERRASTI, LANDER (INVEST_PRINCIPAL)   SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO (INVEST)