Ikerketa eta Transferentzia taldeak
ORTIZ DE ZARATE BENGOA, GORKA
Dagokion taldea: Errendimendu handiko mekanizazioa
Izen abizenak: GORKA ORTIZ DE ZARATE BENGOA
Herritartasuna:
Harremanetarako Telefonoa: 943794700
Kontaktatu
Formakuntza
Lizentziatua, Ingeniaria, Gradua, Arkitektoa
- Mekanikako Ingeniaritza, Mondragon Unibertsitatea, 2015
Graduondoa
- Industria ingenieritza, Mondragon Unibertsitatea, 2017
Egungo lan egoera
- Erakundea: Mondragon Unibertsitatea
- Zentroa: Goi Eskola Politeknikoa
- Departamentua: Mekanika eta Ekoizpen Industriala
- Ezagutza arloa: Ingeniería de los procesos de fabricación
- Kontratazio mota: Contratado
- Maila/Lanpostua: Doktoregaia
- Ikerketa taldea: Errendimendu handiko mekanizazioa
Txostenak kongresuetan/Konferentziak
Towards inverse simulation: Effect of material parameters on machining predictions AIP Conference Proceedings. Vol. 2113. Nº 1. Proceeedings of the 22nd International ESAFORM Conference on Material forming (ESAFORM 2019). Editor, Lander Galdos et al. Published 2 July, Urtea: 2019 Egileak: A. Sela, G. Ortiz-de-Zarate, D. Soriano, M. Cuesta, I. Arrieta, P. J. Arrazola |
Influence of chip segmentation of Ti64 on the topography of the machined surface AIP Conference Proceedings 2113 (Proceedings of the 22nd International ESAFORM Conference on Material Forming). Published Online: 02 July, Urtea: 2019 Egileak: G. Ortiz-de-Zarate, A. Sela, D. Soriano, D. Soler, P. Aristimuño, and P. J. Arrazola |
Hizkuntzen ezagutza
- Ingelesa (C1)
Adiabatic self-heating determination for Ti6Al4V at different temperatures ARTICULO | International Journal of Heat and Mass Transfer. V. 204. N. articulo 123747 Urtea: 2023 | ISBN/ISSN: 1879-2189 Egilea: SELA BARRIAL, ANDRES GALLEGOS, L. GERMAIN, GUÉNAËL SOLER MALLOL, DANIEL ORTIZ DE ZARATE BENGOA, GORKA ARRAZOLA ARRIOLA, PEDRO JOSE |
Effect of Tool Geometry and LCO2 Cooling on Cutting Forces and Delamination when Drilling CFRP Composites Using PCD Tools COMUNICACION_CONGRESO | Procedia CIRP. Vol. 108. Issue C. Pp. 752-757, Urtea: 2022 | ISBN/ISSN: 2212-8271 Egilea: RODRIGUEZ BOGAJO, IÑIGO CUESTA ZABALJAUREGUI, MIKEL PUŠAVEC, F. ARRAZOLA ARRIOLA, PEDRO JOSE SORIANO MORENO, DENIS ORTIZ DE ZARATE BENGOA, GORKA |
Enhancing surface integrity of A7050-T7451 aluminium alloy by pneumatic machine hammer peening COMUNICACION_CONGRESO | Procedia CIRP. Vol. 108. Pp. 317-322, Urtea: 2022 | ISBN/ISSN: 2212-8271 Egilea: MADARIAGA ZABALA, AITOR CUESTA ZABALJAUREGUI, MIKEL ARRAZOLA ARRIOLA, PEDRO JOSE ORTIZ DE ZARATE BENGOA, GORKA GARAY ARAICO, AINARA DOMINGUEZ ROMERO, ERIKA |
Surface topography irregularities generated by broaching ARTICULO | CIRP Annals. Vol. 71, No. 1, p. 105-108, Urtea: 2022 | ISBN/ISSN: 1726-0604 online Egilea: ORTIZ DE ZARATE BENGOA, GORKA ARRAZOLA ARRIOLA, PEDRO JOSE CHILDS, THOMAS H.C. MADARIAGA ZABALA, AITOR |
Inverse Identification of the Ductile Failure Law for Ti6Al4V Based on Orthogonal Cutting Experimental Outcomes ARTICULO | Metals. Vol. 11. N. 8. N. artículo 1154, Urtea: 2021 | ISBN/ISSN: 2075-4701 Egilea: SELA BARRIAL, ANDRES DUCOBU, FRANÇOIS GERMAIN, GUÉNAËL ORTIZ DE ZARATE BENGOA, GORKA SOLER MALLOL, DANIEL ARRAZOLA ARRIOLA, PEDRO JOSE |
Measurement of plastic strain and plastic strain rate during orthogonal cutting for Ti-6Al-4V ARTICULO | International Journal of Mechanical Sciences. Vol. 198. N. artículo 106397, Urtea: 2021 | ISBN/ISSN: 0020-7403 Egilea: SELA BARRIAL, ANDRES SOLER MALLOL, DANIEL ARISTIMUÑO OSORO, PATXI XABIER ARRAZOLA ARRIOLA, PEDRO JOSE GERMAIN, GUÉNAËL ORTIZ DE ZARATE BENGOA, GORKA |
A novel methodology to characterize tool-chip contact in metal cutting using partially restricted contact length tools ARTICULO | CIRP Annals. Vol. 70. Nº 1. Pp. 61-64, Urtea: 2021 | ISBN/ISSN: 0007-8506 Egilea: ORTIZ DE ZARATE BENGOA, GORKA MADARIAGA ZABALA, AITOR ARRAZOLA ARRIOLA, PEDRO JOSE CHILDS, THOMAS H.C. |
In-SEM micro-machining reveals the origins of the size effect in the cutting energy ARTICULO | Scientific Reports. Vol. 11. N. 1. Article 2088, Urtea: 2021 | ISBN/ISSN: 2045-2322 Egilea: MEDINA CLAVIJO, BENTEJUI ORTIZ DE ZARATE BENGOA, GORKA ARRAZOLA ARRIOLA, PEDRO JOSE CHUVILIN, ANDREY ARRIETA GALDOS, IÑAKI MIRENA FEDORETS, ALEKSANDR SELA BARRIAL, ANDRES |
Experimental and FEM analysis of dry and cryogenic turning of hardened steel 100Cr6 using CBN Wiper tools COMUNICACION_CONGRESO | Procedia CIRP. Vol. 102. Pp. 7-12, Urtea: 2021 | ISBN/ISSN: 2212-8271 Egilea: ORTIZ DE ZARATE BENGOA, GORKA GARAY ARAICO, AINARA ARRAZOLA ARRIOLA, PEDRO JOSE SORIANO MORENO, DENIS MADARIAGA ZABALA, AITOR RODRIGUEZ BOGAJO, IÑIGO |
Surface drag analysis after Ti-6Al-4V orthogonal cutting using grid distortion COMUNICACION_CONGRESO | Procedia CIRP. Vol. 87. Pp. 372-377, Urtea: 2020 | ISBN/ISSN: 2212-8271 Egilea: SELA BARRIAL, ANDRES ARISTIMUÑO OSORO, PATXI XABIER SORIANO MORENO, DENIS GERMAIN, GUÉNAËL DUCOBU, FRANÇOIS ARRAZOLA ARRIOLA, PEDRO JOSE ORTIZ DE ZARATE BENGOA, GORKA SOLER MALLOL, DANIEL |
Sensitivity analysis of the input parameters of a physical based ductile failure model of Ti-6Al-4V for the prediction of surface integrity COMUNICACION_CONGRESO | Procedia CIRP. Vol. 87. Pp. 533-538, Urtea: 2020 | ISBN/ISSN: 2212-8271 Egilea: ORTIZ DE ZARATE BENGOA, GORKA SELA BARRIAL, ANDRES ARRAZOLA ARRIOLA, PEDRO JOSE CHILDS, THOMAS H.C. MADARIAGA ZABALA, AITOR |
Towards inverse simulation: Effect of material parameters on machining predictions COMUNICACION_CONGRESO | AIP Conference Proceedings. Vol.21132. Proceedings of the 22nd International ESAFORM Conference on Material Forming. Article 080021. July, Urtea: 2019 | ISBN/ISSN: 9780735418479 Egilea: SELA BARRIAL, ANDRES ORTIZ DE ZARATE BENGOA, GORKA ARRAZOLA ARRIOLA, PEDRO JOSE ARRIETA GALDOS, IÑAKI MIRENA CUESTA ZABALJAUREGUI, MIKEL SORIANO MORENO, DENIS |
A mechanistic model to predict cutting force on orthogonal machining of Aluminum 7475-T7351 considering the edge radius COMUNICACION_CONGRESO | Procedia CIRP. Vol. 82. Pp. 32-36. Elsevier, Urtea: 2019 | ISBN/ISSN: 22128271 Egilea: SELA BARRIAL, ANDRES ARRAZOLA ARRIOLA, PEDRO JOSE MEDINA CLAVIJO, BENTEJUI ARRIETA GALDOS, IÑAKI MIRENA ORTIZ DE ZARATE BENGOA, GORKA ARISTIMUÑO OSORO, PATXI XABIER SORIANO MORENO, DENIS |
FEM modeling of hard turning 42CrMoS4 steel ARTICULO | Procedia CIRP. Vol. 82. Pp. 77-82, Urtea: 2019 | ISBN/ISSN: 22128271 Egilea: SAEZ DE BURUAGA ECHEANDIA, MIKEL SOLER MALLOL, DANIEL ARISTIMUÑO OSORO, PATXI XABIER MIELGO MERINO, ROBERTO ORTIZ DE ZARATE BENGOA, GORKA ARRAZOLA ARRIOLA, PEDRO JOSE GAINZA, L. AIZPURU, OIHAN |
Evaluation of different flow stress laws coupled with a physical based ductile failure criterion for the modelling of the chip formation process of Ti-6Al-4V under broaching conditions COMUNICACION_CONGRESO | Procedia CIRP. Vol. 82. Pp. 65-70. Available online 5 July, Urtea: 2019 | ISBN/ISSN: 22128271 Egilea: ORTIZ DE ZARATE BENGOA, GORKA DUCOBU, FRANÇOIS SELA BARRIAL, ANDRES ARRAZOLA ARRIOLA, PEDRO JOSE SAEZ DE BURUAGA ECHEANDIA, MIKEL CHILDS, THOMAS H.C. SOLER MALLOL, DANIEL |
Influence of chip segmentation of Ti64 on the topography of the machined surface COMUNICACION_CONGRESO | AIP Conference Proceedings. Vol.21132. Proceedings of the 22nd International ESAFORM Conference on Material Forming. Article 080022. July, Urtea: 2019 | ISBN/ISSN: 00001984 Egilea: ORTIZ DE ZARATE BENGOA, GORKA SELA BARRIAL, ANDRES ARRAZOLA ARRIOLA, PEDRO JOSE SORIANO MORENO, DENIS SOLER MALLOL, DANIEL ARISTIMUÑO OSORO, PATXI XABIER |
Methodology to establish a hybrid model for prediction of cutting forces and chip thickness in orthogonal cutting condition close to broaching ARTICULO | The International Journal of Advanced Manufacturing Technology. Vol. 101. Nº 5–8. Pp. 1357–1374. April, Urtea: 2019 | ISBN/ISSN: 02683768 Egilea: ORTIZ DE ZARATE BENGOA, GORKA GARAY ARAICO, AINARA SAEZ DE BURUAGA ECHEANDIA, MIKEL CUESTA ZABALJAUREGUI, MIKEL MADARIAGA ZABALA, AITOR ARRAZOLA ARRIOLA, PEDRO JOSE SELA BARRIAL, ANDRES |
Modelización por elementos finitos del torneado de aceros en estado templado = Finite element modelling of the turning of quenched steels ARTICULO | Dyna. Vol. 94. Nº 3. Pp. 331-337. Mayo, Urtea: 2019 | ISBN/ISSN: 00127361 Egilea: GAINZA ARTOLA, LEIRE AIZPURU, OIHAN SOLER MALLOL, DANIEL SAEZ DE BURUAGA ECHEANDIA, MIKEL ARRAZOLA ARRIOLA, PEDRO JOSE ARISTIMUÑO OSORO, PATXI XABIER MIELGO, ROBERTO ORTIZ DE ZARATE BENGOA, GORKA |
The statistical analysis of the resilence module COMUNICACION_CONGRESO | Conference on Public Recreation and Landscape Protection - With Man Hand in Hand. Brno, Czech Republic. 03-05 May 2005. Pp. 258-264. Brno: Mendel University, Urtea: 2015 | ISBN/ISSN: 2336-632X Egilea: ORTIZ DE ZARATE BENGOA, GORKA SEVELOVA, LENKA |
Egindako tesiak
Broaching of Udimet 720 Li: Assessment of Surface Integrity Combining Experimental and Finite Element Modelling Approaches Irakurtze data: 2021-12-17 Zuzendaria: Pedro José Arrazola y Aitor Madariaga Egilea: ORTIZ DE ZARATE BENGOA, GORKA |